Custom Reaction Injection Mold Tooling and Fixtures
VMW is a full service RIM Tooling and mold repair and maintenance facility staffed by RIM mold and fixture builders. We provide secondary finishing operations quoted upon request.
Custom RIM Tooling
Reaction Injection Molding (RIM) is a low cost tooling process to achieve Polyurethane and Urethane plastic parts.
RIM molds can be used to make intricate designs with Class A surfaces. RIM Tooling is lower in cost than other plastic manufacturing methods. The wide variation of applications is why manufactures cannot ignore the potential of RIM Tooling.
Learn more about Reaction Injection Molding (RIM)
SRIM Tooling
Structural Reaction Injection Molding (SRIM) is an affordable way to greatly reduce the overall weight of large components. Large equipment panels benefit from the light weight and structural strength.
Learn more about Structural Reaction Injection Molding (SRIM)
RRIM Tooling
Reinforced Reaction Injection Molding (RRIM) uses filler materials to gain extra strenght, tensile elongation and dimensional stability. RRIM is an excellent choice when dimensional stability and mechanical properties are major engineering requirements.
Learn more about Reinforced Reaction Injection Molding (RRIM)
FIP Tooling
Foam in Place (FIP) creates soft touch products. Depending upon the material, FIP is perfect for applications from automotive headrests, consumer seating to furniture arm rests. Foam in Place also can be more of a structural element like an automotive dashboard, decorative trim or furniture components.
Foam in Place is an area of manufacturing where VMW excels. The complexity of the mold and the requirements of the finished product requires advanced knowledge of all the possible ways to use FIP.
Learn more about Foam in Place Tooling (FIP)
Encapsulation Tooling
Glass Encapsulation Mold Tooling is beneficial to industries like consumer, commercial, telecommunications, construction, medical and others have been utilizing the benefits. Glass encapsulation can be used everywhere glass needs to act as a protectant against elements or as insulation to keep objects at a constant temperature.
Learn more about Glass Encapsulation Tooling (FIP)
Thermoform Tooling
Thermoform Tooling is also known as Vacuum Forming. Thermoforming is perfect for blister packs, clamshell packages, medical and other components that require a surface with no crevices or joints.
Thermoform molds can be machined from a variety of materials. Prototype molds can be designed and machined with very short lead times.
Learn more about Thermoform Tooling
Skin on FIP – Spray Skin Tooling
We specialize in spraying Polyurethane or Urethane Skin on Foam in Place (FIP). Skin on FIP is used on products that need a cover yet also need to be completely secured.
Spray Skin Tooling is often used for seating in marine vessels, public seating on mass transit or other public venues as well as for medical seating and reclining devices.
Learn more about Skin on FIP – Spray Skin Tooling
Tooling Fixtures
We can build tooling fixtures for secondary operations after parts have been molded.
